Dynacord L2400
Dynacord L 2400 Product Details
The model L 2400 is a 2 x 1200 Watts Power Amplifier. Linear Precision Series power amps combine excellent audio performance, modern and innovative circuit design, meticulous and exceptionally rigid construction, and the highest levels of operational integrity and reliability with an appropriate and more than realistic price. The robust steel chassis provides outstanding torsional strength through L-shaped side panels reaching under the thick aluminium front panel. Thermal breakers prevent the power supply units from being damaged by thermal overload. Electronically controlled fans provide sufficient frontto-rear airflow and a special cool air diverter takes care of thermal stability. The fans’ noise-level is extremely low which provides the possibility for studio use. If necessary, a supplied air-filter can be mounted behind the front panel ventilation louvres. The L-2400 embody separate and fully independent DUAL-MONO power supply units.
FeaturesExcellent audio performance
Symmetrical topology
Ultra-low distortion
Generously dimensioned power supply units
Suitable to be operated on loads down to 2 ohms
Suitable to drive complex loads with phase angles of ± 90 degree
Extensive protection circuitry
Unique Back-EMF protection
Switchable limiters
Switchable Hi/Lo-Cut filters
Robust steel chassis
Exceptional low noise front-to-rear air-flow
XLR-type inputs and direct-outs
LED display shows On, In, Out, Limit and Protect
DUAL-MONO power supplies
Highly reliable operation
SpecsMax. Output Power - into 8 ohms : 2 x 850 W at 1 kHz / THD = 1.0%
Max. Output Power - into 4 ohms : 2 x 1300 W at 1 kHz / THD = 1.0%
Max. Output Power - into 2 ohms : 2 x 1800 W at 1 kHz / THD = 1.0%
Max. Output Power - into 8 ohms bridged : 1 x 2600 W at 1 kHz / THD = 1.0%
Max. Output Power - into 4 ohms bridged : 1 x 3600 W at 1 kHz / THD = 1.0%
Rated Output Power - into 8 ohms : 2 x 750 W at 20 Hz - 20 kHz / THD = 0.1 %
Rated Output Power - into 4 ohms : 2 x 1200 W at 20 Hz - 20 kHz / THD = 0.1 %
Rated Output Power - into 2 ohms : 2 x 1500 W at 20 Hz - 20 kHz / THD = 0.1 %
Rated Output Power - into 8 ohms bridged : 1 x 2400 W at 20 Hz - 20 kHz / THD=0.1%
Rated Output Power - into 4 ohms bridged : 1 x 3000 W at 20 Hz - 20 kHz / THD=0.1%
Frequency Response : 0 dB ..... -1 dB/20 Hz - 20 kHz
Phase Angle Response : ± 30 degree/20 Hz.....20 kHz
Maximum Output Level : 91 V / RMS before clipping, no load, ref. 1 kHz / THD = 1%
Voltage Gain ref. 1 kHz : 26 dB (constant gain option)
Input Sensitivity : 0 dBu/0.775 V, +6 dBu/1.55 V at rated output / 4 ohms ref. 1 kHz
Maximum Input Level : +21 dBu / 8.7 V
Input Impedance active balanced : 20 kohms
THD at Rated Output : < 0.05 % MBW = 80.0 kHz, f = 1 kHz
IMD -SMPTE : < 0.01 % 60 Hz, 7 kHz, at rated output
Signal-to-Noise Ratio : >105 dB at rated output into 4 ohms, A-weighted, RMS, input sensitivity +6 dBu
Attenuation at rated output : > 70 dB f = 1 kHz
Damping Factor internal 1 kHz : > 300
DIM 30 : < 0.01 %
DIM 100 : < 0.01 %
Slew Rate internal : > 40 V / µs
Power Consumption : 1650 W 1/8 rated output into 4 ohms
Width : 483 mm
Height : 132.5 mm
Depth : 426 mm
Weight : 29 kg
Condition
New (old stock)