Dynacord Powermate 2200

Channels (mono + stereo)
18 + 4
Auxilarys (MON, FX, AUX)
2 Pre, 2 Post, 2 Pre/Post switchable
Max. Single Channel Output Power, Dynamic Headroom, IHF-A
Into 2.66Ω: 2 x 1600W
Into 4Ω: 2 x 1250W
Into 8Ω: 2 x 675W
Max. Single Channel Output Power, Continuous, 1kHz, THD=1%
Into 2.66Ω: 2 x 1350W
Into 4Ω: 2 x 1150W
Into 8Ω: 2 x 650W
Max. Midband Output Power, 1kHz, THD=1%, Dual Channel
Into 2.66Ω: 2 x 1350W
Into 4Ω: 2 x 1000W
Into 8Ω: 2 x 600W
Rated Output Power, 20Hz to 20kHz, THD<0.5%, Single Channel
Into 4Ω: 2 x 900W
Into 8Ω: 2 x 450W
Max. Output Voltage, of Power Amplifier, 1kHz, No Load
74 Vrms
THD, at 1kHz, MBW=80kHz
Mic Input to Master A L/R Outputs, +16dBu, Typical: <0.005%
Power Amp Inputs to Speaker L/R Outputs: <0.075%
DIM 30, Power Amplifier, 3.15kHz, 15kHz
<0.05%
IMD-SMPTE, Power Amplifier, 60Hz, 7kHz
<0.15%
Frequency Response, -3dB, ref. 1kHz
Any Input to Any Mixer Output: 15Hz to 70kHz
Any Input to Speaker L/R Output: 20Hz to 30kHz
Crosstalk, 1kHz
Amplifier L/R: <-85dB
Channel to Channel: <-80dB
Mute and Standby Switch Attenuation: >100dB
Fader and FX/AUX/MON Send Attenuation: >85dB
CMRR, Mic Input, 1kHz
>80dB
Input Sensitivity (all level controls in max. position)
Mic: -74 dBu (155 µV)
Line (mono): -54 dBu (1.55 mV)
Line (stereo): -34 dBu (15.5 mV)
CD (stereo): -34 dBu (15.5 mV)
Power Amp Inputs: +8 dBu (1.95 V)
Max. Level, Mixing Desk
Mic Inputs: +21dBu
Mono Line Inputs: +41dBu
Stereo Line Inputs: +30dBu
All Other Inputs: +22dBu
All Other Outputs: +22dBu
Input Impedances
Mic: 2kΩ
Insert Return: 3.3kΩ
2Track Return & CD In: 10kΩ
All Other Inputs: > 15kΩ
Output Impedances
Phones: 47Ω
All Other Outputs: 75Ω
EIN, Mic Input, A-weighted, 150Ω
-130dBu
Noise, Channel Inputs to Master A L/R Outputs, A-weighted
Master Fader Down: -97dBu
Master Fader 0dB, Channel Fader Down: -87dBu
Master Fader 0dB, Channel Fader 0dB, Channel Gain Unity: -81dBu
Signal/Noise Ratio, Power Amplifier, A-weighted, 4Ω
105dB
Output Stage Topology, Amplifier
Class D
Equalization
Lo Shelving: ±15dB / 60Hz
Mid Peaking, Mono Inputs: ±15dB / 100Hz to 8kHz
Mid Peaking, Stereo Inputs: ±12dB / 2.4kHz
Hi Shelving: ±15dB / 12kHz
Master EQ 11-Band (63, 125, 250, 400, 630, 1k, 1.6k, 2.5k, 4k, 6.3k, 12k Hz): ±10dB/Q=1.5 to 2.5
Filter
Lo-Cut, Mono Inputs: f=80Hz, 18dB/oct
Voice Filter, Mono Inputs: switchable
Feedback Filter, Mon 1/2: 70 Hz to 7 kHz, Notch, -9 dB
Speaker Processing: LPN, switchable
Effects
Type: dual stereo 24/48-bit multi effects processors
Effects Presets: 100 factory + 20 user, tap-delay
Remote Control: footswitch, MIDI
Display
128 x 64 pixels, OLED
Digital Audio Interface
Channels: 4 in / 4 out
AD/DA Conversion: 24-bit
Sampling Rate: 44.1 / 48 / 88.2 / 96 kHz
PC Interface: USB2.0, Female Type B
Peak Display: 6dB before clip
MIDI Interface
5-pin DIN connector, in/out
Output Power Control (speaker protection)
adjustable longterm RMS limiter
Protection
Mixer Outputs (relay controlled): MON 1, MON 2, MASTER A
Amplifier: Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Turn-on Delay, Back EMF
Switching Mode Power Supply (µC controlled): Inrush Current Limiters, Mains Over/Undervoltage, Mains Over Current, High Temperature
Cooling
continuous speed controlled fans
Phantom Power (switchable in groups)
48 V DC
Power Requirements (SMPS with auto range mains input)
100V to 240V AC, 50Hz to 60Hz
Power Consumption
450W (at 1/8 max. output power, 4Ω)
Dimensions (WxHxD)
32.22" x 6.48" x 22.5"
Weight
39.68 pounds